- Level Measurement & Monitoring
- Water Quality Meters
- Dataloggers & Sensors
- Monitoring Wells, Piezometers & Multilevels
- Sampling Devices & Pumps
- Microbial Sampling & Bioremediation
- Modelling Software
- Groundwater Mapping
101B Water Level Meter
Solinst 101B Water Level Meter features a basic design, making them a very economical option for depth to water level measurements. The 101B uses polyethylene flat tape, heat embossed in centimeter increments. Tape lengths available are 30 m, 60 m, and 100m. The robust stainless steel P1 Probe is ½" (12.7 mm) in diameter.
|Tape shape||Flat, dog bone shaped polyethylene tape|
|Markings||Heat embossed markings each cm|
|Conductor||7 strands of stainless steel in each conductor|
|Tape width||3/8" (10 mm)|
|Max length||100m (300ft)|
|Probe construction||P1 316 stainless steel probe|
|Probe dimensions||5/8" (16 mm) diameter, 4" (102 mm) length|
|Probe weight||100 grams
- Plastic faceplate & backplate
- Plastic hub
- Probe holder (metal clamp) on front of faceplate
The Model 101B Water Level Meter uses a solid stainless steel probe, connected to durable polyethylene flat tape. A standard 9 volt battery, housed inside the reel hub, powers the Water Level Meter. The electronics are coated for water resistance.
When the probe enters water, the electrical circuit is completed, sending a signal back to the reel where a light and clearly audible buzzer are activated. The water level is then determined by taking a reading directly from the tape at the top of the well casing or borehole.