- Level Measurement & Monitoring
- Water Quality Meters
- Dataloggers & Sensors
- Monitoring Wells, Piezometers & Multilevels
- Sampling Devices & Pumps
- Microbial Sampling & Bioremediation
- Modelling Software
- Groundwater Mapping
New 3001 DataGrabber™ 5
How the New DataGrabber 5 Works
The DataGrabber 5 connects to a Levelogger’s direct read cable; alternatively, an L5 Threaded or Slipfit Adaptor allows you to connect it directly to a Levelogger 5. The DataGrabber connects to an AquaVent 5 Wellhead using a Connector Cable, or directly to a LevelVent 5 Wellhead. The USB flash drive key is plugged into the socket on the front of the DataGrabber.
A push-button on the DataGrabber 5 starts the downloading process. All of the data in the datalogger’s memory is transferred to the USB device. The DataGrabber comes with a 2 GB USB flash drive key with a second connection for a USB-C device, if required. It is also compatible with most other USB flash drives. The datalogger is not interrupted if it is still logging. The data in the datalogger memory is not erased.
A light changes colour to indicate when the DataGrabber 5 is properly connected, when the data transfer is taking place, and when the data has been successfully downloaded. The DataGrabber uses one 9 volt alkaline or lithium battery that is easy to replace when required.
-One push-button to download data
-Inexpensive and easy to transport
-Compatible with most USB flash drive keys
-Connects to a Levelogger’s L5 Direct Read Cable/ Adaptor or LevelVent/AquaVent 5 Wellhead
-Uses separate, replaceable 9V battery
-LED light to indicate operation
-Data transfer does not interrupt running datalogger